Antminer Z9 Specifications:
|Reference power on wall, Watt||970|
|Reference power efficiency on wall @25℃, J/KSol||23.1|
|Adapted AC/DC output requirement, Watt / Volt||1201/ 12.00|
|Hashrate & Power|
|Power efficiency on wall @25℃, J/KSol (1-1)||23.1||24.7|
|Power efficiency on wall @40℃, J/KSol (1-2)||24.7||26.4|
|Reference power on wall, Watt (1-3)||970||1162|
|DC input voltage range, Volt (1-4)||11.60||12.00||13.00|
|DC input current range, Amp (1-5)||80.8||100|
|Adapted AC/DC output power requirement, Watt (1-6)||1081||1201|
|Quantity of hash chips||48|
|Quantity of hash boards||3|
|Networking connection mode||RJ45 ethernet 10/100M|
|Miner Size (Length*Width*Hight, w/o package), mm||226*134*277|
|Net weight, kg||4.7|
|Noise, dBA @25℃ (2-1)||70|
|Operation temperature, ℃||0||25||40|
|Storage temperature, ℃||-40||25||85|
|Operation humidity, RH||5%||95%|
PSU: A power supply unit is not included.
You will need an ATX Power supply with sufficient 7 six-pin PCIE connectors. All PCIE connectors on a hashing board need to be connected to the PSU for the hashing board to operate.
Separate power supply to control board: there is one additional 6 pin PCIE connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 6 pin PCIE connectors are connected to power supply.
The to be shipped products may have a different industrial design than the photo here.